Glint
Gateway 0.1

Every lab instrument, speaking one language.

Glint is a small, low-cost adapter that sits between a lab instrument and your computer, so readings arrive as clean data instead of being copied by hand.

  • Translates each instrument's protocol into standard data
  • Goes wireless over Wi-Fi or Bluetooth
  • Logs every reading with a timestamp
  • Swappable cartridges for RS-232 today, more interfaces planned
Get in touch
Gateway 0.1 · CAD Drag to rotate
The problem

Lab instruments can't talk to your computer.

Instruments last for decades, but the cables, software and PCs that connect them don't. So people read the display and copy the numbers by hand, which is slow and easy to get wrong.

RS-232RS-485USB GPIBCAN
Balance display12.4031 g
Lab notebook12.4301 g
Two digits swapped by hand. Now it's "data."
How it works

From the instrument to your spreadsheet, no typing.

01 · Instrument

Sends a reading

A lab balance sends a weight over its RS-232 port.

02 · Cartridge

Converts signals

The cartridge turns RS-232 into logic levels the processor can read.

03 · Glint

Translates

The balance's profile turns it into a value, unit, device and timestamp.

04 · Output

Lands in your data

Sent over USB or Wi-Fi, and logged even when offline.

Gateway 0.1 with its lids removed, showing the processing block and the connection cartridge
Modular by design

Swap the cartridge, not the device.

Gateway 0.1 has an ESP32-S3 processing block and a removable cartridge for each kind of instrument connection.

RS-232Prototype · building now
RS-485 / 422Planned
USBPlanned
CAN busPlanned
GPIBPlanned
  1. Align the cartridge on the printed guide rails
  2. Slide it in; 16 internal contacts mate automatically
  3. Snap latch locks it; press to release
Our edge: the converter harness

LLMs + statistical models produce nearly deterministic converters.

Our harness combines LLMs with statistical models like Jev to turn instrument manuals and recorded data into converters that behave almost identically every time. Each one is tested against real instrument data and reviewed by a person before it ships. No AI runs on the device.

Who it's for

Built for the labs big platforms skip.

Academic research labs

Aging instruments, tight budgets, and students who rotate out every year.

QC & testing labs

Hand-copied readings are slow and a data-integrity risk in audits.

Small biotech startups

Connected lab data without an enterprise software contract.

Teaching labs

Students spend class time on science, not on copying numbers.

Roadmap

Where Glint is headed.

Phase 1 · Now

Develop Gateway 0.1

A working prototype, then more interface cartridges.

Phase 2

Lab pilots

Real use on real instruments in labs.

Phase 3

Market-ready product

A redesign shaped by what we learn in the pilots.

Have an instrument that won't talk?

We're looking for labs to pilot Gateway 0.1. Tell us what's on your bench.

Contact us